Why Do My AirPods Keep Cutting Out (Solved)

Why Do My AirPods Keep Cutting Out

We have all been there – vibing to your favorite track or watching a moving and the audio starts lagging and chopping up.  Even worse, your AirPods keep cutting out or drop completely during an interview or work meeting.

Apple’s wireless AirPods were launched in 2016 and have been very well-received, especially by Apple owners. Three AirPod models are available in 2021 as the successor to Apple’s wired earbuds. The AirPods (currently in second generation), AirPods Pro, and AirPods Max.

Apple’s strength lies in its simplicity.  That being said, many users (including myself) have had intermittent connectivity issues with their wireless headphones via Apple forums. Bluetooth headphones are not immune to this problem but this is not solely a Bluetooth problem.

Why are My AirPods Cutting Out and Glitching?

AirPods are beloved by many as one of the most important pieces of technology of recent years. It’s not surprising, really. AirPods offer more than just music streaming.

Apple has continued to improve their AirPods/AirPods Pro with every generation, but many people still experience audio cutting.

Cutouts can occur when your audio is choppy or stuttering, even though the AirPods appear to be connected to your device. This is not the same as when the AirPods suddenly stop working or sound too quiet.

Before we solve the problem of the cutouts let’s first understand what causes it. This will help you prevent future instances. You will also know the best steps to take in case it happens again.

Audio sources

If your AirPods sound fine but your audio cuts out, the problem may be with the audio source.

Too many apps may be running on the audio source, which could slow down or disrupt the Bluetooth connection that the AirPods need. If this happens, it is possible that the drivers are out of date and you will need to update them.

Audio cut outs can also be caused by audio enhancements to the audio source. It may sound counterintuitive but this could happen if your AirPods cannot handle the additional processing load.

Low Battery

The Bluetooth connection becomes disconnected when the AirPods’ batteries die. This will cause audio to stop working through them. However, audio will continue to play on your source device.

AirPods may also stop working if there is insufficient power. This is typically less than 20%. AirPods must have enough power to function at peak performance.

AirPods are capable of providing up to 5 hours listening time with a full charge. You can charge your AirPods with the included charging case for up to 4-5 full charges.

An Unstable Connection

The main advantage of wireless earbuds that are truly wireless is their convenience. You don’t need to worry about the wires becoming tangled or your device collapsing because you misplaced it.

But, there is a caveat to this: Relying on wireless connections makes them more susceptible for issues like Bluetooth interference or range limits.

Bluetooth interference happens when something, such concrete objects or other wireless connections, interferes with the Bluetooth connection between two devices. Bluetooth uses the frequency of 2.4GHz to reach your device. But, so does your typical Wi-Fi router.

The 2.4GHz spectrum is where Wi-Fi or Bluetooth can “talk to” your device. Wi-Fi channels occupy a large portion of this space while Bluetooth channels receive any part of the spectrum Wi Fi has not yet taken.

This is fine if there aren’t many WiFi sources. However, more Wi-Fi resources means less spectrum for Bluetooth to talk with your device. This can cause your AirPods’ to stop working.

Bluetooth range is an important aspect. This refers to how far you can move away from your device in order to stay connected. AirPods’ optimal range is between 30-60 feet (10-18m). If you move outside of this range, the audio connection becomes weaker and crackles.

AirPod sensor issues

AirPods, just like other wireless headphones, detect when they’re inside your ear. They automatically play and pause the music as appropriate. Automatic Ear Detection, also known as Automatic Ear Detection, is enabled by default.

When you take out one of your AirPods, the sound will pause and resume after a short time. After you take out both AirPods, the audio will pause and won’t resume again until you place them back on.

You won’t miss any sound if you take your AirPods off. But, this can also cause audio cuts for some users. This can occur when the detection isn’t perfect, such as when your AirPods aren’t able to detect you wearing them.

Hardware defect

Sometimes, hardware defects are to blame. These may include manufacturing defects, such as the one that occurred with a few AirPods Pros released in October 2020. Your warranty may cover damages resulting from misuse. This could also be due to the fact that AirPods are fake.

AirPods’ electronics can become damaged or deficient, and sound problems may occur. Imitations don’t come with the Apple software. These imitations are often cheap, and don’t have the proper functions or build quality.

AirPods could also fail due to dirt and dust accumulation. Therefore, it is important to clean your AirPods at least once a month.

Incompatible firmware version

Apple tablets and phones run the iOS software. The iOS software has undergone many updates since its initial release in 2007; it has also been updated several times. As with all new releases, bugs are quite common during the initial stages of updating. AirPods can be affected by bugs and other errors such as sudden cuts offs.

You should update your software as a rule of thumb. This is because bugs found in earlier versions should already have been fixed in the latest version.

Why do my AirPods keep pausing and playing?

AirPods come with proximity sensors, which sense when you place them in your ears or take them out. Unless you specify otherwise, this will play or pause the content automatically. The sensors could be faulty, which may explain why your AirPods keep crashing while still in your ears.

Why is my AirPod audio glitching?

The problem with your Bluetooth connection could be the cause of giddy sounding AirPods. The problem could be caused either by weak signal strength or interference from other appliances and devices. Make sure that your Bluetooth connection is working properly.

Why does my AirPods keep disconnecting or glitching?

Most often, your AirPods connect via Bluetooth but the output source of the AirPods is different. To access the “Output tab”, go to System preferences > Sound. Select your AirPods, and if they’re already selected, go back to the computer audio. Then select the AirPods once more after 10 seconds.

Why Do My Headphones Keep Cutting Out?

Audio may cut out due to faulty hardware or a poor network configuration. If audio cuts in and out on one phone, it could be due to a variety of reasons. Network issues are likely to be the cause of audio problems on multiple phones.

Why does my Bluetooth keep cutting out iPhone?

  • Interference issues
  • Too far away from the audio source
  • Internet problems while streaming
  • Low headphones battery
  • Headphones & device mismatch
  • Headphones defect
  • Audio source issues

How do you fix AirPods keep cutting out?

After we have listed some common reasons for this, it is time to address the problem. These are the steps to take if your AirPods continue cutting.

  • Make sure to check the battery levels
  • Check Bluetooth connection
  • Disconnect the AirPods and reconnect them
  • Reset your AirPods
  • Turn off the Automatic Ear Detection
  • Upgrade your AirPods firmware
  • Apple Support

Disconnect the AirPods and reconnect them

Sometimes it is necessary to disconnect the AirPods and reconnect them in order to fix or remove bugs. How to do this with an iPhone

  1. Click Settings > Bluetooth. Find your AirPods’ name, then tap the “i”, beside it.
  2. Tap forget this device and confirm.
  3. Take a moment to wait. Now, connect them by holding the AirPods case in your hand close to the iPhone. Wait for the setup animation to display on your screen, then tap Connect.

If the setup animation is not showing, hold the button for your AirPods’ case.

Reset your AirPods

If none of these options still work, then you should reset your AirPods back to factory settings.

Resetting your airpods can restore them to the factory settings. It’s as if they’re brand new. This will erase all modifications made and also forget all devices connected to your iCloud. You’ll need to repeat the setup process afterward.

This is how to do this for your AirPods/AirPods Pro.

  1. Reassemble the AirPods and close the cover.
  2. For 15 seconds, press and hold the multifunction buttons at the back of your case until the status light changes from amber to blue.
  3. Connect the AirPods to the iPhone by keeping the case close to the device. Open the lid and follow the instructions.

Compare the battery levels

It is important to first check your AirPods’ batteries levels. AirPods don’t have any indicator lights on the earpieces, so users aren’t always aware when their batteries have dropped to very low levels.

Here’s how to test your AirPods battery with an iPhone

  1. Hold your AirPods Case near your iPhone with the AirPods inside.
  2. Open your AirPods case.
  3. After a while, your battery status should appear on the iPhone screen.

Check Bluetooth connection

If you have good battery life but sound quality is poor, it could be that your Bluetooth connection is not working properly.

Here are some tips to boost your Bluetooth connection.

* Physical obstructions can interrupt your wireless connection. Keep your device close to your AirPods in order to eliminate any potential interference.

* You might consider moving to another location, especially if you have no interference from Wi Fi routers, microwave ovens or wireless speakers.

Upgrade your AirPods firmware

Firmware is a type or computer software that provides low level programming control to the hardware of a device. It could contain basic functions or the whole operating system.

While it’s difficult to manually upgrade AirPods to the latest firmware version, Apple claims that it is possible.

Turn the Automatic ear Detection Off

Automatic Ear Detection can sometimes cause more problems than they solve for users. Automatic Ear Detection can be completely turned off to allow your AirPods’ audio to continue playing regardless of whether or not they are worn. This could help prevent your audio from cutting off.

Why My AirPods Keep Cutting Out: Conclusion

In this article, we have attempted to address all the possible causes and solutions. Apple’s wireless headphones will work for most users again. However, connectivity issues might still occur for some users. Feel free to post your concerns in the comments, and get help from other Apple users.

If you don’t find the solution you need, there is another Apple advantage: The company’s support. Visit an Apple Store and ask an employee about your connection issues. The problem could also be hardware related. In this instance, you can get new headphones.

FAQs:

How can I disable automatic ear-detection?

Here’s how you do it:

  1. Click Settings > Bluetooth. You will find your AirPods there. Tap the small “i”, at the top.
  2. By pressing the toggle button, you can turn off Automatic Ear Detection.

How can I update the firmware of my AirPods?

These are the steps for updating your AirPods’ firmware.

  1. The AirPods should be turned on. They can also be connected to your iPhone via Bluetooth.
  2. The firmware will automatically download, update, and be installed on the AirPods.
  3. You can check the firmware version of your AirPods by going to Settings > Bluetooth.
  4. Locate your AirPods by tapping the small icon in the upper right corner.
  5. Make sure to check the Firmware Version

Leave a Reply

Your email address will not be published.